Perfecting Brisket Point: Tips, Techniques & Recipe (2024)

3 Shares

If you’re an outdoor cooking enthusiast like me, you know that mastering the art of brisket is a true badge of honor. In this article, I’m going to demystify the often-overlooked brisket point and provide you with a tantalizing recipe to elevate your outdoor cooking game. So, let’s jump right in and uncover the secrets.

f you’re an outdoor cooking enthusiast like me, you know that mastering the art of brisket is a true badge of honor. In this article, I’m going to demystify the often-overlooked brisket point and provide you with a tantalizing recipe to elevate your outdoor cooking game. So, let’s jump right in and uncover the secrets.

Jump ahead to:

Brisket Flat Cut vs. Point Cut

Brisket is a tough and flavorful cut of meat that comes from the breast or lower chest of a cow. The brisket consists of two main parts: the flat and the point.

The Flat

The flatis the more common and recognizable part of the brisket. It’s long and slender, with a generous layer of fat on top. This fat acts as a natural basting agent during cooking, keeping the meat wonderfully moist. You’ve likely encountered the flatat your local supermarket, and it’s the preferred choice for dishes like Homemade Corned Beef.

The Point

Now, let’s shift our focus to the star of the show—the brisket point. This cut is thicker and smaller in overall dimensions compared to the flat and is known for its leanness, whereas the point is notably fattier and generously marbled with more fat and connective tissue, which translates to an explosion of flavor. However, the trade-off is that it contains less meat, making it a prime candidate for grinding into hamburger meat or shredding for delectable sandwiches.

Perfecting Brisket Point: Tips, Techniques & Recipe (1)

The brisket point is known for its richness and tenderness due to the increased amount of fat. This marbling adds flavor and juiciness to the meat, creating a melt-in-your-mouth experience. However, because of its smaller size and lower meat content it may not be ideal for serving as a standalone dish.

One popular option for the brisket point is to grind it into hamburger meat. The increased fat content makes for a flavorful and juicy burger patties. By combining the brisket point with leaner cuts of meat, you can create a well-balanced ground beef for a delicious burger.

Another enticing option is to shred the brisket point. Slow-cook the meat until it becomes tender and easily falls apart. The result is a delectable meat that can be used in sandwiches, sliders, or tacos. The shredded brisket pairs well with various condiments, like barbecue sauce or coleslaw, creating a mouthwatering combination.

The brisket point is sometimes referred to as the ‘Deckle.’ This name comes from the long, thick, fatty, and muscular layer that attaches the flat to the rib cage—the point itself. It’s the Deckle that contributes to the rich, succulent character of this cut.

How Much Meat and Fat Does it Contain?

To put it into perspective, the brisket point comprises approximately 21% fat and 18% protein. While it may seem quite fatty, the yield of meat, especially when shredded, remains plentiful.

Why Brisket Point is Preferred by Pitmasters

Brisket point, also known as the “fatty” or “deckle “portion of a beef brisket, is preferred by pitmasters and barbecue enthusiasts for several reasons:

  1. Rich Flavor: The brisket point is characterized by a higher fat content compared to the flat or leaner portion of the brisket. This marbling of fat throughout the meat imparts a rich, succulent flavor to the meat when it is slow-cooked, which many people find incredibly appealing.

  2. Moisture and Tenderness: The higher fat content in the brisket point helps keep the meat moist during the long smoking or cooking process. This results in a more tender and juicy end product, making it a popular choice for barbecue aficionados who prioritize tenderness and moistness in their smoked meats.

  3. Rendered Fat: As the brisket point cooks low and slow, the fat within it renders down, basting the meat from the inside. This self-basting quality contributes to the meat’s flavor and juiciness, creating a flavorful and tender final product.

  4. Bark Formation: The bark, or outer crust, of smoked briskets is highly sought after for its intense flavor and texture. The fat cap on the brisket point helps create a thick, flavorful bark that adds a delightful contrast to the tender meat beneath. Pitmasters often strive for a well-developed bark, which is easier to achieve with the point’s extra fat.

  5. Versatility: Brisket points are versatile and can be used in various barbecue dishes. The fattier point cut is preferred for pulled beef,and can be sliced for sandwiches, chopped for tacos, or diced for burnt ends, a popular barbecue delicacy known for its intense flavor and unique texture. Thewhole briskettogether is known as an “untrimmed” brisket or “packer cut” and is also frequently smoked and sometimes pickled for corned beef.Pitmasters appreciate the flexibility the point offers in creating diverse barbecue dishes.

  6. Crowd-Pleaser: Many people are drawn to the rich, flavorful, and indulgent nature of brisket point. When prepared properly, it tends to be a crowd-pleaser at barbecue gatherings and events, making it a favorite choice for pitmasters looking to satisfy a diverse range of tastes.

  7. Traditional Appeal: In the world of barbecue, tradition and authenticity are highly valued. Brisket, particularly the point, has a long history in American barbecue culture. Pitmasters often prefer to work with cuts that have deep-rooted traditions, and the brisket point certainly fits this criterion.

In conclusion, the preference for brisket point among pitmasters is largely driven by its superior flavor, tenderness, and versatility in barbecue cuisine. Its ability to create a well-developed bark and self-baste during cooking contributes to its popularity, making it a staple choice for those looking to create mouthwatering, authentic barbecue dishes.

How to Separate the Point From the Flat

Separating the brisket point from the flat is a common step when preparing a whole brisket for smoking or cooking. Here’s how to do it:

Tools you’ll need:

  1. Sharp Knife: A long, sharp chef’s knife or a boning knife works well for this task.
  2. Cutting Board: Use a sturdy cutting board with a groove to catch any juices.

Steps:

  1. Identify the Point and Flat: The brisket consists of two main parts: the point (also known as the deckle) and the flat. The point is the thicker, fattier part of the brisket, while the flat is leaner and flatter.

  2. Place the Brisket on the Cutting Board: Put the whole brisket on your cutting board with the fat side facing up.

  3. Trim Excess Fat: Before separating the point from the flat, it’s a good idea to trim any excessive fat on the surface. You don’t need to remove all the fat, as some is essential for flavor and moisture, but you can trim off any thick or hard fat deposits.

  4. Locate the Natural Separation Line: There is a natural fat line that runs between the point and the flat. This is what you’ll follow when separating them. It’s usually visible as a thick white line of fat.

  5. Make an Initial Cut: Start by making a small, shallow incision along the fat line. This initial cut will help you get started.

  6. Separate the Point from the Flat: Use your knife to gently follow the natural fat line. As you cut, you’ll need to work your knife through the connective tissues that hold the two parts together. This may require some careful slicing and, in some cases, a bit of wiggling or maneuvering.

  7. Continue Separating: Keep cutting along the fat line, taking your time to ensure you’re cleanly separating the two parts. Be cautious not to cut yourself, and use slow, deliberate motions.

  8. Trim and Season as Desired: Now that you have the point and flat separated, you can trim each piece individually to your preference. Some people like to trim more fat from the flat, while others leave it as is for added moisture during cooking. You can also season each piece according to your recipe or preference.
  9. Cook as Desired: Once you’ve separated and prepared the point and flat, you can cook them separately or together, depending on your recipe and cooking method.

Remember to practice caution when using a sharp knife, and take your time to ensure a clean separation of the brisket point from the flat. This will help you get the best results when cooking your brisket

Recipe for Mouthwatering Triple C Smoked Brisket Point

Ingredients:

  • 3-4 pounds of brisket point (also known as deckle)
  • Triple C dry rub seasoning (recipe provided below)

Instructions:

  1. Preheat lump charcoal or briquettes in a smoker and maintain a smoker temperature of 225-250 degrees Fahrenheit. Add 2-3 chunks of your preferred smoking wood to the lit charcoal and replace the top grill grate.
  2. Generously season the point with the Triple C dry rub seasoning.
  3. Place the seasoned point onto the smoker, close the lid, and cook until the internal temperature reaches 195 degrees Fahrenheit.
  4. Remove the brisket point from the smoker and let it rest for 15 minutes. Then, slice it against the grain before serving alongside your favorite BBQ side dishes.

*Note: If you don’t have a smoker, you can set up your grill for 2-zone cooking by placing preheated charcoal briquettes on one side of the bottom grate of a kettle grill to create a hot side and a warm side. Add 2-3 chunks of your preferred smoking wood to the charcoal and replace the top grill grate. Close the bottom vent almost entirely to maintain a temperature of approximately 225-250 degrees Fahrenheit.

Perfecting Brisket Point: Tips, Techniques & Recipe (2)

Triple C Dry Rub

Ingredients:

Instructions:

  1. Combine all the ingredients in a small bowl and mix thoroughly. Store the dry rub in an airtight container until you’re ready to use it.


This versatile brisket point recipe opens the door to a world of culinary possibilities. Beyond its succulent smoked form, the brisket point can be repurposed in various ways. For those seeking a traditional barbecue experience, the tender slices of smoked brisket point are a delectable centerpiece, complemented by classic BBQ sides. However, this recipe also serves as a gateway to creating mouthwatering burnt ends, a beloved barbecue delicacy. By cubing and re-smoking the point, then generously coating it in sauce, you can achieve a flavorful and tender bite-sized treat that’s perfect for snacking or adding a rich, smoky kick to sandwiches and tacos. Whether you opt for the traditional smoked brisket point, experiment with burnt ends, or craft tantalizing sandwiches and tacos, this recipe is a ticket to a world of savory delights.

Common Mistakes to Avoid When Cooking Brisket Point

Cooking brisket point can be a rewarding culinary experience, but there are several common mistakes to avoid to ensure your end result is tender, flavorful, and perfectly cooked:

  1. Skipping the Trim: Neglecting to trim excess fat from the brisket point can result in an overly greasy and less flavorful dish. While some fat is desirable, removing excessive or hard fat is essential to prevent an excessively fatty end product.

  2. Not Allowing Enough Time: Brisket point is a tougher cut of meat, and it requires low and slow cooking to break down the collagen and connective tissues. Rushing the cooking process can lead to a tough and chewy result. Plan for plenty of cooking time, often 6-8 hours or more.

  3. Inconsistent Temperature: Maintaining a steady and consistent cooking temperature is crucial for achieving tender brisket. Fluctuations in temperature can lead to uneven cooking and potentially dry or tough meat.

  4. Underseasoning: Brisket point can handle bold flavors, so don’t skimp on the seasoning. Be generous with your rub or seasoning blend to ensure the meat is well-seasoned throughout.

  5. Not Using a Thermometer: Cooking brisket point to the right internal temperature is vital. A meat thermometer is your best friend in this regard. Aim for an internal temperature of around 195-205°F (90-96°C) for optimal tenderness.

  6. Slicing Too Soon: Cutting into the brisket point immediately after cooking can cause all the juices to escape, leaving you with a dry result. Allow the meat to rest for at least 15-30 minutes before slicing to let the juices redistribute.

  7. Overlooking the Smoke: If you’re smoking your brisket point, pay attention to the type and amount of wood used for smoking. Too much smoke or using overly pungent woods can overpower the meat’s natural flavors.

  8. Improper Storage: If you have leftovers, it’s crucial to store them correctly to maintain their quality. Use airtight containers or wrap them well to prevent drying out in the refrigerator or freezer.

  9. Skipping the Sauce: While the flavor of well-cooked brisket can stand on its own, a complementary barbecue sauce can elevate the experience. Don’t forget to serve a flavorful sauce on the side.

  10. Not Practicing Patience: Cooking brisket point is an art that requires patience. Rushing any step of the process can lead to subpar results. Take your time and enjoy the journey of creating a mouthwatering dish.

By avoiding these common mistakes, you’ll be well on your way to mastering the art of cooking brisket point and delighting your taste buds with a flavorful and tender end product.

How to Store and Reheat Brisket Point

Storing and reheating brisket point requires careful consideration to maintain its delicious flavor and tenderness. To store leftover brisket point, allow it to cool to room temperature, then wrap it tightly in plastic wrap or aluminum foil and place it in an airtight container.

Refrigerate for up to three to four days, or freeze it for longer storage, where it can remain good for several months.

When reheating, it’s essential to preserve its moisture. For the best results, wrap the brisket point in foil to prevent drying out, and reheat it in an oven at a low temperature, around 250°F (120°C), until it reaches your desired internal temperature. This slow reheating method will help maintain the brisket’s juicy tenderness and smoky flavor, ensuring a satisfying meal even after storage.

FAQ’s

1. Which is better flat or point brisket?

The choice between flat and point brisket depends on your preference and cooking method. The flat offers leaner slices, while the point, with its extra fat, provides a richer flavor and is great for shredding or making burnt ends.

2. How do I ensure my brisket point remains juicy during cooking?

To keep your brisket point moist, consider cooking it low and slow. The fat within the point will naturally baste the meat as it cooks. Additionally, wrapping the point in foil or butcher paper during the cooking process can help retain moisture. Remember to let it rest before slicing or shredding to allow the juices to redistribute evenly.

3. What type of dry rub works best for enhancing the flavor of the brisket point?

The choice of dry rub depends on your personal preferences, but a classic combination is a simple salt and pepper rub. If you want to add depth and complexity, try a triple-C rub with coffee, cocoa, and chili. Whichever rub you choose, ensure it complements the beefy flavor without overpowering it.

4. What’s the ideal internal temperature to aim for when cooking the brisket point?

For the brisket point, you can aim for an internal temperature between 150-165°F (65-74°C). However, it’s crucial to consider your desired level of doneness. Some prefer it slightly firmer, while others like it more tender. Use a reliable meat thermometer to monitor the temperature and adjust accordingly.

5. Can you explain the double smoking technique for producing burnt ends with the brisket point?

Certainly! Double smoking is a method used to create delectable burnt ends from the brisket point. After initially smoking the point to a certain point (usually around 150-165°F), you remove it from the smoker and cube it into bite-sized pieces. These cubes are then seasoned and smoked again until they develop a flavorful bark and irresistible tenderness. The result is a heavenly treat that combines smokiness, richness, and a satisfying crunch—all in one bite.

Conclusion

In conclusion, the brisket point may be the unsung hero of the BBQ world, but it’s time to give it the recognition it deserves. With its intense flavor, succulent marbling, and versatility, the brisket point can be your ticket to BBQ excellence. So, fire up that smoker, embrace the aroma of smoldering wood, and embark on a brisket point adventure that will elevate your outdoor cooking game to new heights.

3 Shares

Perfecting Brisket Point: Tips, Techniques & Recipe (2024)
Top Articles
Latest Posts
Article information

Author: Reed Wilderman

Last Updated:

Views: 5978

Rating: 4.1 / 5 (72 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Reed Wilderman

Birthday: 1992-06-14

Address: 998 Estell Village, Lake Oscarberg, SD 48713-6877

Phone: +21813267449721

Job: Technology Engineer

Hobby: Swimming, Do it yourself, Beekeeping, Lapidary, Cosplaying, Hiking, Graffiti

Introduction: My name is Reed Wilderman, I am a faithful, bright, lucky, adventurous, lively, rich, vast person who loves writing and wants to share my knowledge and understanding with you.