For Successful Fudge Every Time | RICARDO (2024)

Fudge is one of those must-have holiday treats. Everyone has a favourite recipe: Aunt Lucille makes her fudge in the microwave, Grandma adds maple extract and, why not, Ricardo adds white chocolate to his!

Despite every conceivable alternative, the preparation method must pass through the same three unavoidable steps: ingredients are cooked on the stove or in the microwave, cooled and stirred. And, voilà, fudge! Sounds simple, doesn't it? So why does fudge turn out smooth and creamy sometimes, and hard and grainy other times? Follow us to better understand the steps to making perfect fudge.

Cook until the correct temperature

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize.

Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F). The cooking is intended to evaporate a part of the liquid and concentrate the sugar. The temperature of the cream/sugar mixture (called syrup) rises as water evaporates. At a cooking temperature of 114 to 115 °C (237 to 239 °F), there is just enough water left in the syrup to ensure it is not too hard or too soft.

Too cooked

This fudge was cooked to a temperature of 118 °C (244 °F). At this temperature, the sugar is too concentrated and there is not enough water left to form syrup around sugar crystals. The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Undercooked

This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Cool before stirring

After cooking, the mixture must cool before being stirred in order to make it crystallize. This cooling period is essential: this is what determines the size of sugar crystals which, remember, should be as tiny as possible. Ideally, the syrup should cool to a temperature of around 43 to 50 °C (110 to 122 °F).

Beating before cooling

This fudge was beaten immediately after cooking, while it was still very hot. Its crystals are so big that it has practically reverted back to a sugar state! What happened? Beating the syrup caused the formation of crystallization nuclei, anchor points to which sugar molecules attach to form crystals. Few crystallization nuclei will form in syrup that is still hot, and sugar molecules will readily attach to them. The crystals grow so easily, and the result is really grainy fudge. Better to toss it and start all over!

Beating after cooling

This fudge cooled until it reached 43 to 45 °C (109 to 113 °F) before being beaten. It has a smooth and creamy texture, just how we like it. Here's why: syrup becomes quite viscous (thick) while cooling, and this slows the movement of sugar molecules. When you start to beat it, billions of crystallization nuclei suddenly form, but the crystals stay tiny as sugar molecules have a hard time sticking together.

Sugar crystals

Fudge is a crystalline confectionery, due to the fact that it contains sugar crystals. The smaller the crystals, the less we perceive it on the tongue, the smoother and creamier it is in the mouth. As is the case with many sweets, making fudge is all about the details and seemingly simple steps (see "Our tips to making successful fudge"), which have a major impact on the final result. The better you control the size and growth of crystals, the greater the chance the fudge will succeed. And it all begins first and foremost with temperature control.

How to check the temperature?

You should ideally check the temperature with a candy thermometer or probe left in the saucepan throughout cooking. You don't have a thermometer? You can always do the 'cold water test': drop a small amount of hot syrup in a glass of cold water. As it falls to the bottom of the glass, the syrup cools and forms into a ball. Remove the ball from the water and check its consistency with your fingers. For perfect fudge, the syrup should form a soft ball that can be picked up, but easily flattened. If the syrup is undercooked, drops of syrup will sink to the bottom of the glass in threads or simply dissolve. If the syrup is overcooked, the ball will be hard and difficult to flatten with your fingers. Repeat the test every two or three minutes until you obtain the desired consistency. Use a clean spoon every time you scoop up a bit of syrup.

Our tips to making successful fudge

1 › Calibrate your thermometer
To do this, boil water and take its temperature with the thermometer. It should read 100 °C (212 °F). If it doesn't, take the difference into account during cooking.

2 › Make sure sugar crystals are dissolved at the start of the cooking
Start cooking over low heat and stir until the sugar is completely dissolved. Don't stir for the rest of the cooking.

3 › Pay attention
The syrup temperature rises slowly at first, but a lot faster after 104 °C (220 °F). Don't get distracted! One or two degrees can make all the difference.

4 › Allow to cool without stirring
The syrup can cool down slowly, by staying in the saucepan at room temperature, or you can speed up the process by putting the saucepan in a sink filled with cold water. Don't use ice water. Syrup at the saucepan's edges will cool too quickly while the centre remains too hot.

5 › When the mixture cools, beat it continually
… until it starts to crystallize. If you beat it by hand with a wooden spoon, crystallization can take between 5 to 15 minutes. The process is much faster with an electric mixer, just 2 to 3 minutes. The mixture is ready to be poured into a pan when it has visibly thickened and lost a bit of its luster.

For Successful Fudge Every Time | RICARDO (2024)

FAQs

What is the secret to good fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

What is the key to successful non grainy fudge? ›

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking.

How do you know when fudge is beaten enough? ›

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

How long does it take fudge to reach 234 degrees? ›

Cook the mixture over medium-low heat, without stirring, until the thermometer registers 234 degrees, about 20 to 25 minutes. The mixture should boil at a moderate, steady rate over the entire surface. While the fudge is cooking, prepare the baking pan.

How do you make fudge creamy and not grainy? ›

Grainy Fudge

To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

Is evaporated milk or condensed milk better for fudge? ›

Evaporated milk doesn't have sugar added. The sweetened condended milk is needed as no extra sugar is added to the fudge. If evaporated milk were used then the fudge would not be sweet enough and also would still be too soft unless the fudge is frozen.

What makes fudge firmer? ›

If your fudge fails to harden in the fridge, it means that you probably didn't cook it to the right temperature. Fudge is a candy, and that means it is extremely picky about temperature - fudge must be cooked to precisely 237–239 degrees Fahrenheit so that sugar forms the desired consistency when cooled.

What makes fudge softer? ›

If you don't heat your fudge to a high enough temperature, you'll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you'd like.

Why is my 3 ingredient fudge not setting? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Do you stir fudge when it's boiling? ›

Know When and When NOT to Stir

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

When should you not make fudge? ›

Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible. If waiting for a less humid day isn't feasible, you'll need to boil your fudge at a slightly higher temperature than usual — or just order some delicious fudge from Wockenfuss!

What happens if you over stir fudge? ›

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.

What to do with failed fudge? ›

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares.

Why did my fudge come out like taffy? ›

If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).

Do you stir fudge while it is boiling? ›

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

What gives fudge its firm texture? ›

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Can you mess up fudge? ›

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 5650

Rating: 5 / 5 (50 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.